Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, Firmware rev. 3.0 or LATER - Manual (Page 224)

224 Publication 1404-UM001F-EN-P - November 2009
Appendix A Powermonitor 3000 Data Tables
Min/Max Log Parameter List Parameters
Applies to Min/Max Log Configuration/Read-back Select Parameters on page 223
Min/Max Log Results Parameters on page 227
PM3000 Type All
Min/Max Log Parameter List
Param
No. Parameter Name Comment
0 L1 Current Refer to Metering Voltage, Current, and Frequency Result Parameters
1 L2 Current
2 L3 Current
3 Avg Current
4 L1-N Voltage
5 L2-N Voltage
6 L3-N Voltage
7 Avg L-N Voltage
8 L1-L2 Voltage
9 L2-L3 Voltage
10 L3-L1 Voltage
11 Avg L-L Voltage
12 Frequency, last cycle
13 L4 Current Refer to Metering Sequence Voltage, and Current Results Parameters
14 Positive Sequence Current
15 Negative Sequence Current
16 % Current unbalance
17 Positive Sequence Voltage
18 Negative Sequence Voltage
19 % Voltage unbalance
20 Average frequency