Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 12)

Publication 1203-5.13 – February, 2002
P-2 Preface
Contents of this Manual
This manual contains the following information:
Chapter Title Contents
Preface Describes the purpose, background, and
scope of this manual. Also provides
information on safety precautions and
technical support.
1 Overview Provides an overview of the 1203-CN1
module, ControlNet, and SCANport.
2 Installation Provides procedures for installing the
1203-CN1 module.
3 Getting Started Provides procedures for configuring the
1203-CN1 module, including how to set
up a serial connection to the module,
navigate in the module’s software, edit its
parameters, view its serial number,
perform a flash upgrade to its firmware,
and view its event queue.
4 Configuring a Controller to
Communicate with the
1203-CN1 Module Provides procedures for using
RSNetWorx to set up a ControlNet
network and configure controllers to
communicate with devices, such as the
1203-CN1 module.
5 PLC Ladder Logic
Programming Provides information on and an example
of a ladder logic program used to control
the SCANport product.
6 Using Messages Provides information on and examples of
messages used to set and monitor data in
the SCANport product.
7 Troubleshooting Explains how to troubleshoot the
1203-CN1 module using its LEDs.
A Specifications Provides specifications for the 1203-CN1
module.
B 1203-CN1 Module
Parameters Provides information on datalinks,
information on fault configurable inputs,
and a list of the 1203-CN1 module’s
parameters.
C N-File Structure Lists the N-file structure for the 1203-CN1
module and attached SCANport
products.
D ControlNet Objects Provides a reference list of ControlNet
objects.
E Supported PCCC
Messages Provides a reference list of PCCC
messages supported by the 1203-CN1
module.
F Supported Emulated Block
Transfer Commands Provides a reference list of emulated
block transfer commands.