Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 56)

Publication 1203-5.13 – February, 2002
4-12 Configuring a Controller to Communicate with the 1203-CN1 Module
15. In the Network menu, select Action and then Configuration
List. The ControlNet Configuration dialog box appears.
Figure 4.13
Example ControlNet Configuration Dialog Box
16. Verify all devices are configured on your network.
Devices configured on the network will appear in the Current
Configuration list. Figure 4.13 shows all devices are configured
on our example network.
17. Click OK to close the dialog box.
When all devices are mapped to the network, you must verify that
network properties are set correctly.