Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 69)

Publication 1203-5.13 – February, 2002
Using Messages 6-3
Important: If you refer to Appendix C, N-File Structure, you will
find that SCANport product parameter values are contained in the
N10:1 – N12:999.
Important: To view the 1203-CN1 module’s parameters, you would
specify N13:1 instead of N10:1.
Figure 6.2
Read Parameters Logic.
Figure 6.3 contains the values read by this example rung. The zero
element contains the value of parameter 1, the one element contains
the value of parameter 2, etc.
Figure 6.3
Example Results in Decimal Text