Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 50)

Publication 1203-5.13 – February, 2002
4-6 Configuring a Controller to Communicate with the 1203-CN1 Module
Mapping the 1203-CN1 Module to the ControlNet Network
You must configure the 1203-CN1 module on the ControlNet network
so that the controller can communicate with it. Follow these
instructions:
1. Click the Edits Enabled box.
Important: If the Online/Offline Mismatch dialog box appears,
click OK to use the online data. If prompted to save, save the data.
2. Right-click on the controller’s icon (PLC-5) and select
ControlNet Configuration. The ControlNet Configuration
screen appears.
Figure 4.6
Sample ControlNet Configuration Screen