Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 23)

Publication 1203-5.13 – February, 2002
Installation 2-3
Electrostatic Discharge
Precautions Please read the following safety precautions carefully before
installing the 1203-CN1 module
Important: You must wear a grounding wrist strap that is properly
grounded when you handle the 1203-CN1 module.
!
ATTENTION: The 1203-CN1 ControlNet
communications module contains ESD (Electrostatic
Discharge) sensitive parts. Static control precautions
are required when installing, testing, or servicing this
module. Device malfunction may occur if you do not
follow ESD control procedures. If you are not familiar
with static control procedures, refer to Allen-Bradley
publication 8000-4.5.2, Guarding Against Electrostatic
Damage, or other applicable ESD protection handbook.