Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 34)

Publication 1203-5.13 – February, 2002
3-6 Getting Started
10. In the File menu, select Properties. The Properties dialog box
appears.
Figure 3.6
Properties Dialog Box
11. Click the Settings tab.
12. In the Function, arrow, and ctrl keys act as box, verify
Terminal keys is selected.
13. In the Emulation field, verify VT100 is selected.
14. Click OK.
15. In the File menu, select Save. The configuration is saved and the
icon you selected will appear in the initial HyperTerminal
window next time you start HyperTerminal.
Figure 3.7
Example Initial HyperTerminal Window
Important: Next time you need to make a connection to the module,
double-click the icon just created. In Figure 3.7, double-clicking the
1203-CN1.ht icon would re-establish the connection to the module.