Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 33)

Publication 1203-5.13 – February, 2002
Getting Started 3-5
7. Click OK. The Comm Properties dialog box appears.
Figure 3.5
Example Comm Properties Dialog Box
8. Select the following settings:
• 9600 in the Bits per second field.
If you have previously set the module’s Serial Port Rate
(Parameter 21) to enable 19200 bps, set the bps to 19200 in
this field.
• 8 in the Data bits field.
• None in the Parity field.
• 1 in the Stop bits field.
• None in the Flow Control field.
9. Click OK. A blank HyperTerminal screen appears.