Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 User Manual
Page 140
I–2
Index
Publication 1203-5.13 – February, 2002
ControlNet objects, D-1 to D-30
assembly, D-7
connection manager, D-9
ControlNet, D-21
identity, D-2
message router, D-5
non-volatile storage, D-24
parameter, D-13
parameter group, D-19
PCCC, D-30
register, D-11
SCANport pass-through, D-26
SCANport pass-through fault, D-27
SCANport pass-through link, D-29
SCANport pass-through warning, D-28
D
datalinks
description, B-1
I/O size, 4-8
list of, B-2
using, B-1
DF1 protocol statistics, 3-12
DIN rail
attaching module to, 2-5
grounding, 2-4
specification, A-1
E
electrostatic discharge precautions, P-3, A-1
emulated block transfer commands
fault command write, F-15
fault queue entry read full, F-16
fault queue size, F-18
NVS functions, F-14
parameter value read, F-3
parameter value write, F-4
product ID number read, F-8
scattered parameter read value, F-10
scattered parameter write value, F-12
trip fault queue number, F-19
equipment required, 1-5
configuring a controller, 4-1
installation, 2-1
ladder logic programming, 5-3, 6-1
serial connection, 3-2
F
fault configurable inputs, B-1 to B-2
firmware
H
HyperTerminal, 3-3
I
I/O data, 3-11
installation of 1203-CN1 module, 2-1 to 2-8
L
ladder logic programs
description, 5-2
example, 5-3 to 5-6
LEDs
ControlNet, 7-2
location, 7-1
module, 7-4
SCANport, 7-3
M
manual