Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 61)

Publication 1203-5.13 – February, 2002
Chapter
5
PLC Ladder Logic Programming
Chapter Objectives Chapter 5 provides information needed to create the PLC Ladder
Logic program that the controller will use to transmit control I/O and
messages to and from the SCANport product. This information
includes:
• Discussion of PLC ladder logic programs.
• Equipment and software needed to create a PLC Ladder Logic
program.
• Example PLC ladder logic program to control the drive.
This chapter assumes you already have experience creating ladder
logic programs using RSLogix5.
What Is RSLogix5? RSLogix5 software lets you create the ladder logic programs you
need and download them to the PLC. It also lets you monitor the
program as the PLC is using it.
For more information on creating PLC ladder logic programs, consult
the documentation for your controller.
For more information on RSLogix5, consult the documentation for
RSLogix5.