Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 99)

Publication 1203-5.13 – February, 2002
ControlNet Objects: Class Code 0x0F — Parameter Object D-13
Class Code 0x0F — Parameter
Object The Parameter Object provides a known, public interface for device
configuration data. This object also provides all the information
necessary to define and describe each individual configuration
parameter of a device.
Class Attributes
Instances
The number of instances varies based on the number of parameters in
your SCANport product. The 23 module parameters immediately
follow the SCANport product parameters.
Attribute ID Access Rule Name Data Type Description
1
Get Revision UINT Revision of this object. First revision,
value=1.
2
Get Max Instance UINT Maximum instance number of an object
currently created in this class level of
the device.
8
Get Parameter Class
Descriptor WORD Bits that describe parameters.
9
Get Configuration
Assembly Instance UINT Instance number of the configuration
assembly.
This attribute should be set to zero if a
configuration assembly is not
supported.
10
Set Native Language USINT Language ID for all character array
accesses.
0 = English
1 = French
2 = Spanish
3 = Italian
4 = German
5 = Japanese
6 = Portuguese
7 = Mandarin Chinese
Instance Description
1 through n - 23
➀ SCANport Product Parameters
n - 22 through n
➀ Module Parameters
➀
The value of n is the maximum instance in the object. This
value is obtainable via class attribute 2.