Rockwell Automation 1203-CN1 ControlNet Communications Module 1203-CN1 - Manual (Page 55)

Publication 1203-5.13 – February, 2002
Configuring a Controller to Communicate with the 1203-CN1 Module 4-11
14. In the Network menu, select Exit. The ControlNet
Configuration screen closes and the RSNetWorx screen
reappears.
Figure 4.12
Example RSNetWorx Screen with Configured Network
Important: The icon for the SCANport product connected to the
1203-CN1 module (node 4 in Figure 4.12) should appear with a gray
flag on it to indicate it is configured. The
≠ sign may appear in the
flag to indicate your drive’s firmware revision is not matching that in
RSNetWorx. If so, proceed.