Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 102)

102 Publication 2711PC-UM001A-EN-P - March 2009
Chapter 7 Upgrading Firmware
6. From the Firmware source folder text box, select the location of
the firmware files.
The default location is C:\Program Files\Rockwell
Software\RSView Enterprise\FUPs.
7. From the Upgrade firmware version list, select the firmware for
the upgrade, then click Next.
8. Select the appropriate KEPServer drivers, then click Next.
If no KEPServer drivers are needed, just click Next.
TIP
If the selected FUP file does not support the KEPServer
drivers, this dialog box will not appear.