Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 63)

Publication 2711PC-UM001A-EN-P - March 2009 63
Configuring the Terminal Chapter 4
Configuring Startup Tests The terminal can run extended tests on startup. You can select which
test to run and also specify test settings on startup.
Select Tests to Run on Startup
Follows these steps to select tests to run on startup.
1. Select Terminal Settings>Startup Options>Startup Tests.
The screen shows a list of each test that can be performed on
the terminal at startup and its current On/Off status. You can
turn any test in the list on or off by selecting the On/Off button.
The terminal will run tests only with a checked box.
2. Select the tests you want to run on startup.
•
Use the up and down cursor buttons to highlight a test.
•
Press the On/Off button to select a test. A checked box means
the test is selected to run. Press the button again to clear the
check box.
3. Press OK.