Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 115)

Publication 2711PC-UM001A-EN-P - March 2009 115
Troubleshooting Chapter 8
Hardware Compatibility The PanelView Plus Compact 1000 terminal enforces a consistent
hardware identity between the logic module and the internal
CompactFlash (CF) card.
If the product identity of the logic module is PanelView Plus Compact
1000 but the CF card is not, this error is generated:
Fatal Error. The internal CF card is not compatible with the PVPlus Compact Logic
Module. The CF card must be replaced to make the terminal usable.
If the product identify of the CF card is PanelView Plus Compact 1000
but the logic module is not, this error is generated:
Fatal Error. The internal PVPlus Compact CF card is not compatible with the Logic
Module. The CF card must be replaced to make the terminal usable.
If either message occurs, power off the terminal and replace the
internal CF card with one that has a product identity that matches the
product identity of the logic module.
Application Does Not Load You cannot load a regular Machine Edition application created for a
PanelView Plus terminal on a PanelView Plus Compact terminal. If
you do, this dialog box appears:
TIP
You can load a Compact Machine Edition application created
for a PanelView Plus Compact terminal on a PanelView Plus
terminal.