Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 80)

80 Publication 2711PC-UM001A-EN-P - March 2009
Chapter 5 Installing and Replacing Components
6. Press the retaining tab that secures the backlight and then pull
out the backlight.
7. Insert the new backlight.
8. Attach the LCD display connector to the circuit board.
Refer to step 4.
9. Attach the backlight connector to the circuit board.
Refer to step 5.
10. Secure the LCD display with the four screws and tighten the
screws to a torque of 0.58 N•m (5…7 lb•in).
11. Replace the display module bezel.
Backlight
Retaining Tab
Backlight