Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 7)

7 Publication 2711PC-UM001A-EN-P - March 2009 7
Preface
Intended Audience Use this manual if you are responsible for installing, configuring, and
operating the PanelView Plus Compact terminals.
No special knowledge is required to understand this manual or
operate the terminal. However, you must understand the functions
and operations of the FactoryTalk View ME applications that will run
on the terminal. Consult the application designer for this information.
Equipment installers must be familiar with standard panel installation
techniques.
Parts List Your terminal is shipped with these items:
•
Power terminal block
•
FactoryTalk View ME runtime software preloaded
•
Mounting levers or mounting clips (model dependent)
•
Panel cutout template
•
Installation instructions
Additional Resources The table lists resources available for the PanelView Plus terminals.
You can view or download publications at
http://literature.rockwellautomation.com . To order paper copies of
technical documentation, contact your local Rockwell Automation
distributor or sales representative.
Resource Description
PanelView Plus 400 and 600 Terminals
Installation Instructions, publication
2711P-IN002
Provides details on how to install the
terminals in a panel, and wire power.
PanelView Plus 700 to 1500 Terminals and
Display Modules, and PanelView Plus
Compact 1000 Terminals, Installation
Instructions, publication
2711P-IN001
Provides details on how to install the
terminals in a panel, and wire power.
Wiring and Grounding Guidelines for
PanelView Plus Devices Technical Data,
publication
2711P-TD001
Provides grounding and wiring guidelines
for PanelView Plus terminals.