Configuring startup options, For info – Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual
Page 60
Advertising
60
Publication 2711PC-UM001A-EN-P - March 2009
Chapter 4 Configuring the Terminal
Configuring Startup Options
The action the terminal takes on startup depends on how you
configure the startup options. You can:
•
disable FactoryTalk View ME Station software.
•
go to FactoryTalk View Configure mode.
•
run the current application.
Disable FactoryTalk View ME Station Software on Startup
Follow these steps to disable FactoryTalk View Station software on
startup.
1. Select Terminal Settings>Startup Options>FactoryTalk View ME
Station Startup.
2. Press the On Startup button until Do not start FactoryTalk View
ME is selected.
3. Press OK.
Advertising