Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 82)

82 Publication 2711PC-UM001A-EN-P - March 2009
Chapter 5 Installing and Replacing Components
Remove a CompactFlash Card
Press the Eject button on the logic module. When the button pops
out, press it again to release the card. The location of the button varies
depending on the series of the logic module.
The 400 and 600 terminals do not have an eject button. Simply secure
edge of card with fingers and pull card away from slot.
Removing the Product ID
Label You can replace the label on the terminal with another label.
1. Remove the Allen-Bradley label using your fingers or a tweezers.
2. Clean area with damp cloth and isopropyl alcohol.
3. Remove adhesive backing of OEM label and affix over area
where label was located.