Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 70)

70 Publication 2711PC-UM001A-EN-P - March 2009
Chapter 4 Configuring the Terminal
Change the Time Zone
You can modify the current time zone on the terminal. Time zones are
installed as a part of the operating system. When changing the time
zone, the current time and date are adjusted to match the time zone.
Follow these steps to change the time zone.
1. Select Terminal Settings>Time/Date/Regional Settings>Time
Zone.
2. Press the up and down cursor buttons to select a time zone.
If the selected time zone supports Daylight Savings, the Daylight
Savings button is available.
3. Press the Daylight Savings button to enable or disable daylight
savings for the selected time zone.
Daylight Savings is set to Yes for all time zones except Japanese,
which does not support daylight savings. Changes are
permanently applied when you close the Time Zone screen.
4. Press the Use Daylight Savings Button to select Yes or No.
5. Click OK when done.
6. Click OK to return to Terminal Settings.
Language Default Time Zone
English (GMT -05:00) Eastern Time (US and Canada)
French (GMT +01:00) Brussels, Copenhagen, Madrid, Paris
German (GMT +01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna
Japanese (GMT +09:00) Osaka, Sapporo, Tokyo