Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual User Manual
Page 98
98
Publication 2711PC-UM001A-EN-P - March 2009
Chapter 7 Upgrading Firmware
6. Click Finish to copy the firmware source files to the location
specified in step 2.
Upgrade Firmware in Terminal with Firmware Upgrade Card
Follow these steps to upgrade the terminal firmware from a
CompactFlash card.
1. Insert the CompactFlash card into the card slot of a powered
terminal.
A dialog box indicates the firmware upgrade is about to occur.
2. Press Upgrade to begin the firmware upgrade.
A dialog box reminds you to back up all .mer and user files
before upgrading the terminal.
3. Click Yes if you want to continue with the upgrade.
TIP
If the files were created in a folder on a local hard drive, copy
the files to the root directory of the CompactFlash card.
IMPORTANT
Do not remove the CompactFlash card while the upgrade
is in process.