Rockwell Automation 2711PC-xxxx PanelView Plus Compact User Manual - Manual (Page 9)

9 Publication 2711PC-UM001A-EN-P - March 2009 9
Chapter
1
Overview
Chapter Objectives This chapter covers these topics:
•
Product description
•
Catalog number explanation
•
Software support
•
Terminal configurations
•
Display modules
•
Accessories
Product Overview The PanelView Plus Compact terminals are similar to some PanelView
Plus terminal configurations but with limited hardware and software
functions. Major differences of the compact terminals include:
•
Fixed hardware configuration, without the addition or
replacement of modular components.
•
Serial and Ethernet communication only.
•
Connection to a single logic controller using either RSLinx
Enterprise or KEPServer Enterprise software, not both.
•
Limited number of displays and alarms in the FactoryTalk View
Machine Edition (ME) application and runtime software.
•
FactoryTalk ViewPoint software is not supported.
•
Primary HMI for CompactLogix controllers.
Catalog Number
Explanation The table provides catalog number configurations for the PanelView
Plus Compact terminals.
TIP
Applications created for PanelView Plus Compact terminals are
referred to as Compact Machine Edition applications. You can
run compact applications on PanelView Plus and PanelView
Plus Compact terminals. You cannot run a regular Machine
Edition application created for a PanelView Plus terminal on a
PanelView Plus Compact terminal.
Cat. No. Display Size Operator Input Display Type Input Power
2711PC-K4M20D
4 inch
Keypad Monochrome
DC
2711PC-B4C20D Keypad and Touch Color
2711PC-T6M20D
6 inch Touch
Monochrome
2711PC-T6C20D Color
2711PC-T10C4D1 10 inch Touch Color