Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions - Manual (Page 13)

Rockwell Automation Publication 6000-IN006A-EN-P - April 2014 13
Shipping and Handling Procedures Chapter 1
Unpack and Inspect the Drive
Before leaving the factory, all drives have undergone both performance and
quality tests. However, damage may occur during the shipping or handling
process.
Immediately upon receiving the drive, inspect the crates for signs of damage.
After the crates are offloaded, disassemble the crating and check for possible
shipping damage. Use a crowbar or other suitable tool to carefully remove the
packaging. Do not insert the tool too far into the packaging or damage to the
drive cabinet may occur. Inspect the drive cabinets for physical damage according
to the Rockwell Automation Conditions of Sale. Open the doors and inspect the
major components for signs of damage (
Table 2 ).
Figure 1 - Crated Cabinet
Access to the medium voltage cabinets of the drive is restricted by the use of
lockable handles. The cabinet keys are located in the same document/hardware
box as the EDs and DDs (refer to
page 7 ). The box is accessible through the
opening in the cabinet side sheet (without opening a door).
IMPORTANT Any claims for visible breakage or damage must be made to the freight
company by the user as soon as possible after receipt of shipment. Rockwell
Automation will provide the user with reasonable assistance in the securing of
adjustment for such damage claims.