Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions - Manual (Page 18)

18 Rockwell Automation Publication 6000-IN006A-EN-P - April 2014
Chapter 1 Shipping and Handling Procedures
Figure 5 - Rod or Pipe Rollers
Remove the Wooden Skids
Remove the wooden shipping skids when the drive is in its final installation
location. Steel angle brackets bolt the cabinet to the wooden shipping skid.
Remove this hardware, lift the cabinets off the skids, and remove the skids from
underneath.
Refer to Lift the Power Module/LV Control Cabinet on page 19 and Lift the
Isolation Transformer Cabinet on page 23 .
Figure 6 - Angle Brackets
Minimum 51 x 152 mm (2 x 6 in.)
Steel Angle Brackets