Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions - Manual (Page 7)

Rockwell Automation Publication 6000-IN006A-EN-P - April 2014 7
Preface
Introduction This document provides procedural information for physically unloading,
moving, and installing PowerFlex 6000 medium voltage drives.
Who Should Use This Manual This manual is intended for use by professional riggers, general contractors,
electrical contractors, or plant operations personnel familiar with moving and
siting heavy equipment. Specific experience with solid-state variable speed drive
equipment is NOT required for this part of the installation process, but is
mandatory for subsequent processes.
What Is Not in this Manual This manual provides information specific for physically unloading and situating
a PowerFlex 6000 drive. It does not include project-specific, or drive-specific
topics such as:
• Dimensional Drawings and Electrical Drawings generated for each
customer’s order.
• Spare parts lists compiled for each customer’s order.
• Drive-specific technical specifications.
Refer to the following documents for additional product detail or instruction
relating to PowerFlex 6000 drives:
• PowerFlex 6000 Medium Voltage Variable Frequency Drive
Commissioning Manual (6000-IN007_-EN-P): required procedures and
checklists for Rockwell Automation Field Service Engineers.
• PowerFlex 6000 Medium Voltage Variable Frequency Drive User Manual
(6000-UM001_-EN-P): instructions for daily recurring drive usage, HMI
interface and maintenance tasks for the product’s end-user.
Required Supplemental
Information This manual includes generic information about the drive cabinet layout
orientation and generic electrical connection information.
Review the project-specific Dimensional Drawings (DDs) and Electrical
Drawings (EDs) to better understand the specific drive system cabinet
orientation and wiring requirements before performing any mechanical or
electrical work. Paper copies of the DDs and EDs are placed in the document/
hardware box in the Isolation Transformer Cabinet before shipment. Contact the
local Rockwell Automation office to obtain digital copies, if required.
If the drive system is supplied with a bypass cabinet, important information is
included in the user manual.
Bulletin 6012DB Medium Voltage Bypass Cabinet User Manual
(6000-UM002_-EN-P): instructions to connect incoming line and outgoing
motor power cables, interconnection of power cables and control wiring between
bypass cabinet and drive, and instructions for daily recurring usage and
maintenance tasks.