Connect motor and voltage sensing board cables, Introduction – Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions User Manual
Page 60
Advertising
![background image](/manuals/580374/60/background.png)
60
Rockwell Automation Publication 6000-IN006A-EN-P - April 2014
Chapter 4
Drive Electrical Interconnection
Connect Motor and Voltage
Sensing Board Cables
Introduction
The Voltage Sensing Board cables and the motor cables both connect to the same
output point of each motor phase array (
). However, because the fixed-
mount and drawout power module mechanical designs are different, the physical
connection point differs between these two configurations.
The voltage sensing board cables and motor cables are always bundled in the
isolation transformer cabinet for shipment.
Figure 39 - 6/6.6 kV (Fixed-mounted Power Module Configuration)
M10 Hex Nut
Flat Washer
Lock Washer
M10x30 Hex Bolt
Motor Cable
VSB Cable
U Phase
V Phase
W Phase
Front View
Advertising