Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions - Manual (Page 14)

14 Rockwell Automation Publication 6000-IN006A-EN-P - April 2014
Chapter 1 Shipping and Handling Procedures
Figure 2 - Lockable Cabinet Handles
Drive Configurations There are two basic power cell configurations offered in the PowerFlex 6000
product line. For a drive amperage rating
≤ 200 A, a fixed-mounted power module
design is supplied. Fixed-mounted modules are shipped installed in the drive. For
a drive amperage rating of >200 A, a drawout power module design is supplied.
The drawout power modules are removed from the drive before shipment and
shipped in separate crates.
The cabinets may appear slightly different than shown in the illustrations, based
on voltage class and whether the drive configuration has fixed-mounted or
drawout power modules (see
Figure 17 and Figure 18 ).
Shipment List
The complete shipment will consist of a number of crates, as shown below:
Table 1 - Shipment Configurations
VFD Motor Voltage Class
and Amp Rating Bypass Cabinet
(optional) Isolation Transformer
Cabinet
(1)
Power Module/
LV Control Cabinet
Power Modules
(2) Power Module
Lift Cart
(3)
Main Cooling Fans
(4)
3/3.3 kV ≤200 A 1 crate 1 crate 1 crate Fixed-mounted No 3 fans per crate
>200 A 1 crate 1 crate 1 crate Drawout (1 crate) Yes 3 fans per crate
6/6.6 kV ≤200 A 1 crate 1 crate 1 crate Fixed-mounted No 3 fans per crate
>200 A 1 crate 1 crate 1 crate Drawout (2 crates) Yes 3 fans per crate
10 kV ≤200 A 1 crate 1 crate 1 crate Fixed-mounted No 3 fans per crate
>200 A 1 crate 1 crate 1 crate Drawout (3 crates) Yes 3 fans per crate
(1) The document/hardware box contains:
• PowerFlex 6000 Medium Voltage Variable Frequency Drive User Manual (6000-UM001_-EN-P)
• PowerFlex 6000 Medium Voltage Variable Frequency Drive Commissioning Manual (6000-IN007_-EN-P)
• PowerFlex 6000 Medium Voltage Bypass Cabinet User Manual (if supplied) (6000-UM002_-EN-P)
• Testing Reports
• Electrical Drawings (EDs) and Dimensional Drawings (DDs)
• Certifications
• All necessary hardware for mounting lifting angles and fan assemblies, and securing the cabinets together.
• Keys for the lockable cabinet handles
• The locking key for drawout power modules, if supplied
(2) Up to nine drawout Power Modules can be shipped in one crate.
(3) The Power Module lift cart is wrapped in plastic for shipment within China, and crated for shipment outside of China.
(4) Refer to Dimensional Drawings or PowerFlex 6000 Dimensions and Weights on page 75 to determine the number of fans/crates.