Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions User Manual
Page 32
Advertising
32
Rockwell Automation Publication 6000-IN006A-EN-P - April 2014
Chapter 2
Drive Mechanical Installation
Optional:
The cabinet can also be welded to the steel base once it is securely
bolted, if desired.
Each weld location should be 100 mm (3.9 in.) for every 1000 mm (39.4 in.).
Refer to
Mounting Requirements on page 16
for further information on the steel
base and desired trench and mounting specifications.
Figure 21 - Welding locations
Channel Steel Base
Recommended Weld Locations
ATTENTION: Failure to correctly anchor the cabinet may result in damage to the
equipment or injury to personnel.
Advertising