Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 191)

OCI Data Items A–3
Publication 8520-6.6. - August 1999
Control Type Req Dual
Proc.
Units
Dependency
Units Array Indices Num
Indices
OCI/9/PC Data Type Description Item (Name)
309 AXISCAL_TABLE_TYPE Type of the Axiscal table (Measurement/DeviĆ
ation)
SINT [ ] Both 1 NUM_PROG_AXES_PLUS_SKEWSLAVES Yes R All Controls
c Communication Port Parameters
240 DEVICE_ON_PORTA UART device attached to port A INT enumerated OCI 0 No R/W All Controls
241 DEVICE_ON_PORTB UART device attached to port B INT enumerated OCI 0 No R/W All Controls
139 HARDWARE_STATUS_PORTA Port A Serial I/O RTS/CTS/DSR/DTR Status USINT OCI 1 No R All Controls
143 HARDWARE_STATUS_PORTB Port B Serial I/O RTS/CTS/DSR/DTR Status USINT OCI 0 No R All Controls
141 LEVEL_2_STATUS_PORTA Port A Serial I/O DC1-DC4 Status USINT OCI 0 No R All Controls
145 LEVEL_2_STATUS_PORTB Port B Serial I/O DC1-DC4 Status USINT OCI 0 No R All Controls
233 PORT_AUTO_FILENAME UART device auto select program name INT OCI 2 No R/W All Controls
226 PORT_BAUD_RATE UART device baud rate INT enumerated OCI 2 No R/W All Controls
229 PORT_COMMUNICATION_
FORMAT
UART device communication format INT enumerated OCI 2 No R/W All Controls
232 PORT_DATA_BITS UART device number of data bits INT enumerated OCI 2 No R/W All Controls
230 PORT_PARITY UART device parity INT enumerated OCI 2 No R/W All Controls
237 PORT_PERCENT_SELECTION UART device % valid in tape INT OCI 2 No R/W All Controls
238 PORT_PROGRAM_NAME UART device program name in tape INT OCI 2 No R/W All Controls
227 PORT_PROTOCOL UART device protocol INT enumerated OCI 2 No R/W All Controls
235 PORT_REWIND_ON_M02_M30 UART device action on M02/M30 INT OCI 2 No R/W All Controls
236 PORT_REWIND_ON_M99 UART device action on M99 INT OCI 2 No R/W All Controls
234 PORT_STOP_AT_PROGRAM_ END UART device stop at program end INT OCI 2 No R/W All Controls
231 PORT_STOP_BITS UART device number of stop bits INT enumerated OCI 2 No R/W All Controls
239 PORT_TIMEOUT_VALUE UART device timeout value selection INT enumerated OCI 2 No R/W All Controls
228 PORT_TYPE UART device port type (RS232/RS422A) INT enumerated OCI 2 No R/W All Controls
138 RX_CHAR_PORTA Port A Serial I/O Receive
Character
USINT [ ] OCI 1 RX_char_size No R All Controls
142 RX_CHAR_PORTB Port B Serial I/O Receive
Character
USINT [ ] OCI 1 RX_char_size No R All Controls
140 TX_CHAR_PORTA Port A Serial I/O Transmit
Character
USINT OCI 0 No R All Controls
144 TX_CHAR_PORTB Port B Serial I/O Transmit
Character
USINT OCI 0 No R All Controls
316 UART_A_BUSY_STATUS Port A busy status enum UINT OCI 0 No R All Controls
317 UART_B_BUSY_STATUS Port B busy status enum UINT OCI 0 No R All Controls