Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 196)

OCI Data Items A–8
Publication 8520-6.6. - August 1999
Control Type Req Dual
Proc.
Units
Dependency
Units Array Indices Num
Indices
OCI/9/PC Data Type Description Item (Name)
175 MACHINE_TYPE Type of machine -- lathe, mill, grinder, dual, ... USINT Both 0 No R All Controls
11 NUM_OPTIONS Num Options UINT Max Value 2 Both 0 No R All Controls
3 NUM_PROCESSES Num Proc UINT Max Value 2 Both 0 No R All Controls
313 NUM_PROG_AXES Number of programmable axes in the system
(incl duals)
UINT Both 0 Yes R All Controls
314 NUM_PROG_AXES_PLUS_SKEWSLAVES Number of prog axes plus deskew slaves in the
system
UINT Both 0 Yes R All Controls
179 OEM_MESSAGE_1 OEM Message Line 1 STRING1 Both 0 No R/W All Controls
180 OEM_MESSAGE_2 OEM Message Line 2 STRING1 Both 0 No R/W All Controls
181 OEM_MESSAGE_3 OEM Message Line 3 STRING1 Both 0 No R/W All Controls
159 OPTION_SELECTED Options Selected USINT [ ] Both 1 Num Options No R All Controls
17 OPTION_SLOT_NAME_1 Option Slot Name - Slot 1 STRING1 OCI 0 No R All Controls
18 OPTION_SLOT_NAME_2 Option Slot Name - Slot 2 STRING1 OCI 0 No R All Controls
19 OPTION_SLOT_REV_1 Option Slot Revision - Slot 1 STRING1 OCI 0 No R All Controls
20 OPTION_SLOT_REV_2 Option Slot Revision - Slot 2 STRING1 OCI 0 No R All Controls
352 PROCESS_CHANGE_REQUEST Assigning 1 forces process change for dual INT OCI 0 Yes R/W Dual
55 PROCESS_NAMES Process Names STRING1 OCI 0 Yes R Dual
12 PRODUCT_ID Product ID UINT enumerated Both 0 No R All Controls
16 SERVO_FW_REVISION Servo Firmware Revision DINT [ ] Both 1 Num Servo ModĆ
ules
No R All Controls
47 SYSTEM_STATE System State UINT enumerated
PAL
Both 0 Yes R All Controls
63 TIME Current Time STRING1 Both 0 No R/W All Controls
k Offset Data
51 ACTIVE_TOOL_GEOM_NUM Active Tool Geometry Number UINT Both 0 Yes R All Controls
350 ACTIVE_TOOL_LENGTH_AXIS_
LOGICAL_BIT_PATTERN
Bit pattern of axes currently programmed as
the active tool length axis
UDINT Both Yes R All Controls
53 ACTIVE_TOOL_RADIUS_NUM Active Tool Radius Number UINT Both 0 Yes R All Controls
52 ACTIVE_TOOL_WEAR_NUM Active Tool Wear Number UINT Both 0 Yes R All Controls
349 AMPED_TOOL_LENGTH_AXIS_
LOGICAL_BIT_PATTERN
Bit pattern of axes configured as tool length
axis
UDINT Both Yes R All Controls
39 D_WORD D-Word for Display UINT Both 0 Yes R All Controls
351 DRILLING_AXIS_LOGICAL_BIT_PATTERN Bit pattern of axes configured as drilling axis
for fixed cycles
UDINT Both Yes R All Controls
38 H_WORD H-Word for Display DINT Both 0 Yes R All Controls