Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide User Manual
Page 88
4–40
OCI Data Server Data Items
Publication 8520-6.6 - August 1999
PROCESS_CHANGE_REQUEST
Data Type
INT
Read/Write
Read/Write
Array Index
none
Control Type
Lathe/Mill
On dual process systems use this data item to request the control
change the currently active process. Seting the value of
PROCESS_CHANGE_REQUEST to one will request a process
change. The control resets the value to zero when the process
change is completed. Use the PAL/Logic flag $SPROCI to identify
the currently actve process.
Important: Dual process systems are not available for the 9/PC.
PRODUCT_ID
Data Type
UINT (enumerated)
Read/Write
Read only
Array Index
none
Control Type
Lathe/Mill/Grinder
1
1
Grinder Control Type is not available for Release 1 of 9/PC.
Use this data item to identify the CNC hardware platform connected
to your OCI station. The value returned for this product ID is
enumerated as follows:
Enumeration
Result:
9
9/260 Lathe/Mill
10
9/260 Grinder
1
11
9/290 Lathe/Mill
12
9/290 Grinder
1
15
9/260 Multi Process
17
9/290 MultiĆProcess
22
9/PC Lathe/Mill
1
Grinder Control Type is not available for the 9/PC.
Important: Dual process systems are not available for the 9/PC.