Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 223)

OCI Error Handling C–8
Publication 8520-6.6. - August 1999
Error Num: Error Name:
3063 "NO OFFSET ACTIVE"
3064 "OFFSET MOTION PENDING ON CYCLE START"
File Server Errors:
4011 "ERROR OPENING FILE ON HARD DRIVE"
4012 "ERROR READING FILE ON HARD DRIVE"
4013 "ERROR WRITING FILE TO HARD DRIVE"
4014 "ERROR CLOSING FILE ON HARD DRIVE"
4015 "ERROR ACCESSING FILE ON HARD DRIVE"
4019 "ERROR ACCESSING FILE ON HARD DRIVE"
4102 "INVALID OPERATION"
4103 "ERROR OPENING FILE"
4104 "FILE READ ERROR"
4105 "SERVER BUSY"
4106 "NOT CONTROLLING CLIENT"
4107 "IS ACTIVE"
4108 "MUST SPECIFY ALL ADDRESS"
4109 "BAD SMB SIZE"
4110 "ERROR OPENING CNC FILE"
4111 "ERROR WRITING FILE TO CNC"
4112 "FILE HANDLER NOT ACTIVE"
4113 "ENCRYPT ERROR"
4114 "FILE HANDLER TIMEOUT"
4115 "FILE HANDLER NETWORK ERROR"
Part Program Decode Errors:
5001
"THREAD LEAD ERROR"
5002 "READ ERROR"
5003 "INVALID AXIS FOR CSS"
5004 "CODING ERROR"
5005 "TOO MANY DECIMAL POINTS"
5006 "(G-CODE) TABLE ERROR"
5007 "AXIS ASSIGNED TO PAL/LOGIC AXIS MOVER"
5008 "INVALID ZONE LIMIT"
5009 "THREAD LEAD IS ZERO"
5010 "MISSING (F) IN INVERSE TIME" 10
5011 "DWELL VALUE NOT PROGRAMMED"