Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 262)

Index I–22
Publication 8520Ć6.6 - August 1999
G57_WORK_COORD_UNITS, A-18
G58_WORK_COORD_UNITS, A-18
G59_WORK_COORD, A-18
G59_WORK_COORD_UNITS, A-18
G591_WORK_COORD, A-18
G591_WORK_COORD_UNITS, A-18
G592_WORK_COORD, A-18
G592_WORK_COORD_UNITS, A-18
G593_WORK_COORD, A-19
G593_WORK_COORD_UNITS, A-19
WORK_COORD_LABELS, A-19
Work Coordinate System Information`,
G58_WORK_COORD, A-18
WORK_COORD_LABELS, A-19
WORKPIECES_CUT_AFTER_RESET,
A-12
WORKPIECES_CUT_OVERALL, A-12
WORKPIECES_REMAINING, A-12
Write, Example using Visual Basic, 2-3
Write Requests, 1-4
Write/Read Property, data items, 4-2
WRITE_ERROR_CODE, A-4
Write2ErrorFile variable, 3-27
Writing Data Items, poke, 4-12
Z
ZERO_ALL_COM_VALUES, B-4, B-5
Zones and Overtravels
INTERF_FIRST_AXIS_MINUS_AREA_1,
A-19
INTERF_FIRST_AXIS_MINUS_AREA_2,
A-19
INTERF_FIRST_AXIS_PLUS_AREA_1,
A-19
INTERF_FIRST_AXIS_PLUS_AREA_2,
A-19
INTERF_SECOND_AXIS_MINUS_AREA
_1, A-19
INTERF_SECOND_AXIS_MINUS_AREA
_2, A-19
INTERF_SECOND_AXIS_PLUS_AREA_
1, A-19
INTERF_SECOND_AXIS_PLUS_AREA_
2, A-19
INTERF_TOOL_NUM, A-19
LIMIT2_LOWER_LIMITS, A-19
LIMIT2_UPPER_LIMITS, A-19
LIMIT3_LOWER_LIMITS, A-20
LIMIT3_UPPER_LIMITS, A-20
LOGICAL_AXIS_ZONE_GROUP, 4-63,
A-20