Rockwell Automation 8520-9API 9/Series OCI API Developer's Guide - Manual (Page 207)

OCI Data Items A–19
Publication 8520-6.6. - August 1999
Control Type Req Dual
Proc.
Units
Dependency
Units Array Indices Num
Indices
OCI/9/PC Data Type Description Item (Name)
88 G593_WORK_COORD G59.3 Work Coordinate LREAL [ ] Both 1 Num Axes Inch/MetĆ
ric/DeĆ
grees
G593_WORK_CO
ORD_UNITS
Yes R/W All Controls
89 G593_WORK_COORD_UNITS G59.3 Work Coordinate Units INT Both 0 Yes R/W All Controls
345 PLANE E_AXES_INDICES Bit pattern of axes in currently active plane INT[ ] Both Yes R All Controls
202 WORK_COORD_LABELS Labels for work coordinates STRING1 [ ] Both 1 MAX_WORK_CO
ORD
No R/W Grinder
y Zones and Overtravels
265 INTERF_FIRST_AXIS_MINUS_AREA_1 Interference zones first axis minus limit for dual
process interference zone 1
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
264 INTERF_FIRST_AXIS_PLUS_ AREA_1 Interference zones first axis plus limit for dual
process interference zone 1
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
267 INTERF_SECOND_AXIS_MINUS_AREA_1 Interference zones second axis minus limit for
dual process interference zone 1
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
266 INTERF_SECOND_AXIS_PLUS_AREA_1 Interference zones second axis plus limit for
dual process interference zone 1
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
331 INTERF_FIRST_AXIS_MINUS_AREA_2 Interference zones first axis minus limit for dual
process interference zone 2
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
330 INTERF_FIRST_AXIS_PLUS_ AREA_2 Interference zones first axis plus limit for dual
process interference zone 2
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
333 INTERF_SECOND_AXIS_MINUS_AREA_2 Interference zones second axis minus limit for
dual process interference zone 2
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
332 INTERF_SECOND_AXIS_PLUS_AREA_2 Interference zones second axis plus limit for
dual process interference zone 2
LREAL [ ] OCI 1 Interf Tool Number Inch/MetĆ
ric/DeĆ
grees
INTERF_UNITS [
Interf Tool Number
]
Yes R/W Dual
177 INTERF_TOOL_NUM Number of Interference tools -- AMP UINT OCI 0 Yes R All Controls
114 LIMIT2_LOWER_LIMITS Limit 2 Lower Limit LREAL [ ] OCI 1 Num Axes Inch/MetĆ
ric/DeĆ
grees
ACTIVE_UNITS Yes R/W All Controls
115 LIMIT2_UPPER_LIMITS Limit 2 Upper Limit LREAL [ ] OCI 1 Num Axes Inch/MetĆ
ric/DeĆ
grees
ACTIVE_UNITS Yes R/W All Controls