Rockwell Automation 2706-M1 MESSAGEVIEW 421 HARDWARE MANUAL - Manual (Page 36)

3–13 Front Panel Editor
Publication 2706–816
Startup Message
The Startup Message is the first message displayed at initial terminal
powerup or reset. The default startup message is downloaded with
the application.
To view or change the startup message number:
1. Select Startup Message from the Terminal Setup submenu. Press
the Enter key to display the current Startup message
Startup Message
55
2. Use the up or down arrow keys to scroll through the
available message numbers.
Or enter a message number using the numeric keypad if the
terminal is 421N or 421F.
Note: If you use the numeric keypad to enter a Startup Message
number, the arrow keys work as follows:
Increments the number starting with the number you just
entered.
Deletes the last digit of the number you just entered.
3. Press the Enter key to select the displayed message number
and return to the Terminal Setup submenu.
Or press the Ack key to return to the Terminal Setup
submenu without changing the message number.
4. Press the Ack key to return to the FPE menu.