Rockwell Automation 2706-M1 MESSAGEVIEW 421 HARDWARE MANUAL - Manual (Page 57)

3–34 Front Panel Editor
Publication 2706–816
Certain useful aspects of the MessageView terminal may be checked
using the System Status menu on the Front Panel Editor (FPE).
To check the terminal:
1. Select System Status from the Front Panel Editor menu. Press
the Enter key to display the System Status submenu.
Copyright
Comm Diag. LED
Fault Diag. LED
Boot Status
Firmware Status
Application Name
Application Size
Available App Space
2. Use the up or down arrow keys to scroll through the
available options.
3. Press the Enter key to select the highlighted option.
Note: These options are all read-only.
4. Press the Ack key to return to the System Status submenu.
5. Press Ack again to return to the Front Panel Editor (FPE)
menu.
To check the copyright date:
This displays the copyright date(s) of the terminal.
1. Highlight Copyright and press the Enter key to display the
date.
Copyright
1995–96
2. Press the Ack key to return to the System Status submenu.
3. Press Ack again to return to the FPE menu.
System Status