Rockwell Automation 2706-M1 MESSAGEVIEW 421 HARDWARE MANUAL - Manual (Page 51)

3–28 Front Panel Editor
Publication 2706–816
To perform the HE Stack Test
This tests the validity of the Historical Event Stack. See Page 3–29
for a discussion of what the HE Stack does and how to use it.
1. Highlight HE Stack Test and press to run the test.
The result of the test is displayed at once.
HE Stack Test
Test Passed
If the test fails, see Page B–4.
2. Press the Ack key to return to the Self Tests submenu.
3. Press Ack again to return to the FPE menu.
To perform the System Parameters Test
This tests the validity of the terminal’s internal parameters.
1. Highlight System Parameters Test and press to run the test.
The result of the test is displayed at once.
System Parameters
Test Passed
Test
If the test fails, see Page B–4.
2. Press the Ack key to return to the Self Tests submenu.
3. Press Ack again to return to the FPE menu.