Rockwell Automation 2755-DM9, -DM9E High Speed Decoder - Manual (Page 96)

Interface
Chapter 7
Host Commands Using the RS-232 or RS-422
7–4
Host Commands
The remainder of this chapter describes the format of the following host
commands:
Reference
Letter
Mnemonic Function
1 CC Set Code 39, I 2-of-5, and Codabar Check Characters
2 CM Clear Output Counter
3 CT Enable/Disable Bar Code Type
4 DD Set Configuration to Default Values
5 HC Set Host Communications
6 HM Write Header Message
7 IF Set Package Detect Input Filter and Sense
8 IM Write Source Identification Message
9 MC Read Output Counter
10 MF Set Message Format
11 MR Read Match Code Table
12 MW Write Match Code Table
13 NC Clear No-Read Count
14 NM Write No-Read Message
15 NR Read No-Read Count
16 OC Set Output Condition and Duration
17 PC Clear Package Count
18 PR Read Package Count
19 RE Reset Decoder
20 RD Set Configuration to Default Values, Save to EEPROM,
and Restart
21 RN Save Configuration to EEPROM and Restart
22 SA Save Configuration to EEPROM (No Restart)
23 SC Set Scanner Control
24 SL Set Bar Code Specific Length