Rockwell Automation 20L, LPM20 PowerFlex 700 Active Converter Power Module - Manual (Page 11)

PowerFlex 700L Active Converter Power Module User Manual
Publication PFLEX-UM002D-EN-P
Chapter
1
Installation/Wiring
This chapter provides information on installing and wiring the PowerFlex
700 Active Converter Power Module.
Most start-up difficulties are the result of incorrect wiring. Every precaution
must be taken to assure that the wiring is done as instructed. All items must
be read and understood before the actual installation begins.
For information on… See page…
Removing the Active Converter Power Module Covers 1-2
Removing the Active Converter Control Cassette 1-2
Wiring the Active Converter Control Cassette I/O Terminals 1-4
!
ATTENTION: The following information is merely a guide for
proper installation. Rockwell Automation, Inc. cannot assume
responsibility for the compliance or the noncompliance to any
code, national, local or otherwise for the proper installation of
this drive or associated equipment. A hazard of personal injury
and/or equipment damage exists if codes are ignored during
installation.