Rockwell Automation 20L, LPM20 PowerFlex 700 Active Converter Power Module User Manual
Page 20
2-2
Start Up
PowerFlex 700L Active Converter Power Module User Manual
3. The HIM displays that it is currently communicating with the Inverter on
DPI Port 0.
4. Press the Down arrow to scroll to “PowerFlex 700 AC.”
5. With “PowerFlex 700 AC” highlighted as shown in Step 4, press the
Enter key to start communicating with the Active Converter on DPI Port
6.
– To examine the fault queue in the Active Converter, press the Up
Arrow to scroll to “Diagnostics” and press the Enter key.
– To begin examining parameters (with “Parameters” highlighted),
press the Enter key.
– To resume communication with the Inverter, press the Down Arrow to
scroll to “Device Select” and press the Enter key.
6. After accessing the Parameter menu, the display shows the File menu.
Press the Up or Down Arrow to select the desired file and press the Enter
key.
F->
Stopped
Auto
0.0
RPM
Device: Port
0
PowerFlex 700S 2
PowerFlex 700 AC
F->
Stopped
Auto
0.0
RPM
Device: Port
6
PowerFlex 700S 2
PowerFlex 700 AC
Port 6 Device
PowerFlex 700AC
Main Menu:
Diagnostics
Parameter
Device Select
Port 6 Device
PowerFlex 700AC
F
GP: File
Monitor
Command
Limit Config