Chapter 3, Programming and parameters, About parameters – Rockwell Automation 20L, LPM20 PowerFlex 700 Active Converter Power Module User Manual
Page 37: About parameters -1
PowerFlex 700L Active Converter Power Module User Manual
Chapter
3
Programming and Parameters
This chapter provides a complete listing and description of the Active
Converter Power Module parameters. The parameters can be configured
(viewed/edited) using an LCD HIM (Human Interface Module). As a
convenient alternative, programming can also be performed using
DriveExecutive™ or DriveExplorer™ software and a personal computer.
About Parameters
To configure the Active Converter Power Module to operate in a specific
way, parameters may have to be set. Three types of parameters exist:
•
ENUM Parameters
ENUM parameters allow a selection from 2 or more items. The LCD
HIM will display a text message for each item.
•
Bit Parameters
Bit parameters have individual bits associated with features or
conditions. If the bit is 0, the feature is off or the condition is false. If the
bit is 1, the feature is on or the condition is true.
•
Numeric Parameters
These parameters have a single numeric value (i.e. 0.1 Volts).
The example on the following page shows how each parameter type is
presented in this manual.
For information on…
See page…