Rockwell Automation 20L, LPM20 PowerFlex 700 Active Converter Power Module - Manual (Page 13)

Installation/Wiring 1-3
PowerFlex 700L Active Converter Power Module User Manual
Publication PFLEX-UM002D-EN-P
Figure 1.1 Removing the Frame 2 and 3A Active Converter Control Cassette
Frame 3B Drives
Figure 1.2 shows the location and removal of the Active Converter control
cassette to access its terminal blocks for control wiring. Frame 3B drives
have separate Converter Power Modules and Inverter Power Modules.
Figure 1.2 Removing the Frame 3B Active Converter Control Cassette
Internal DPI Cable
Synchronization Cable
(For use with 700 Vector Control only)
Synchronization Cable
(For use with 700S Phase II Control only)
40-Pin
Ribbon Cable
Pin 1
P2
Detail
P1
Communications
Adapter Option
SHLD
SHLD
Internal DPI Cable
40-Pin
Ribbon Cable Synchronization Cable
(For use with coupled Inverter Power
Modules with 700 Vector Control only)
Synchronization Cable
(For use with coupled Inverter Power
Modules with 700S Phase II Control only)
P2
Pin 1
Detail
P1