Dell PowerEdge C8000 User Manual
Page 189
Installing System Components
189
6 Remove the two screws securing the hot-plug hard-drive backplane.
7 Pull the backplane away from the front cover. See Figure 3-33.
Figure 3-33. Removing and Installing the 2.5-inch Hot-Plug Hard-Drive Backplane
1
SATA connector 5
2
SATA connector 4
3
mini-SAS connector 0
4
HDD3 connector
5
HDD4 connector
6
power connector on hot-plug
hard-drive backplane
7
SGPIO connector 2 on hot-plug
hard-drive backplane
8
power connector on NPDB
9
system board control connector
10 I2C connector on NPDB
11 power connector on NPDB
12 power connector on NPDB
13 power connector on interposer
extender
14 power connector on system board
15 I2C connector on system board
16 front panel connector 1
17 power connector on system board
18 SATA_IN connector 4
19 SATA_IN connector 5
1
hot-plug hard-drive backplane
2
M3 screws (2)
1
2