Dell PowerEdge C8000 - Manual (Page 28)

28 About Your System
* This condition is not supported in LSI HBA/RAID cards. When you abort the RAID rebuild process,
the hard-drive LED blinks amber to indicate drive failure.
This LED pattern is not applicable for the non-RAID mode of onboard SATA, for example, without Intel
RSTe drivers.
Sled Hard-Drive LEDs
The hard-drive LEDs located on the front of the C8220X sled alerts you to
the condition of the hard-drives in the sled.
Figure 1-9. Sled Hard-Drive LEDs
Drive rebuilding
aborted*
Off/Blinking when active On 3000 ms
Off 9000 ms Off 6000 ms
On 3000 ms
Off 3000 ms
Condition Hard-Drive LEDs
(HDD0 to HDD7)
Green LED Amber LED
Drive bay empty/Unsupported drive is present Off Off
Drive online/access On Off
Drive identify/Preparing for removal On 250 ms
Off 250 ms Off
Drive rebuilding On 400 ms
Off 100 ms Off
Drive failed Off On 150 ms
Off 150 ms
Condition Hard-Drive Activity LED Hard-Drive Status LED
Green LED Green LED Amber LED