Dell PowerEdge C8000 - Manual (Page 201)

Installing System Components 201
7 If you are removing the card permanently, install a metal filler bracket over
the empty expansion slot opening, and replace the expansion card bracket.
See Figure 3-40.
NOTE: You must install a filler bracket over an empty expansion slot to maintain
Federal Communications Commission (FCC) certification of the system. The
brackets also keep dust and dirt out of the system and aid in proper cooling and
airflow inside the sled.
Figure 3-40. Removing and Installing the MegaRAID SAS 9285CV-8e Card
8 If applicable, remove the MegaRAID SAS 9285CV-8e RAID battery. See
"Removing the MegaRAID SAS 9285CV-8e RAID Battery" on page 205.
1 expansion card latch 2 thumbscrew
3 metal filler bracket 4 MegaRAID SAS 9285CV-8e card
5 RAID battery cable
2
4
1
5
3