Dell PowerEdge C8000 - Manual (Page 205)

Installing System Components 205
Removing the MegaRAID SAS 9285CV-8e RAID Battery
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Remove the sled from the enclosure. See "Removing a Sled" on page 155.
2 Open the sled. See "Removing the Front and Back Sled Covers" on
page 176.
3 Disconnect the RAID battery cable connecting to the MegaRAID SAS
9285CV-8e card. See Figure 3-42.
4 Remove the two screws securing the RAID battery assembly to the sled
tray. See Figure 3-42.
5 Lift the RAID battery assembly from the sled tray. See Figure 3-42.
Figure 3-42. Removing and Installing the MegaRAID SAS 9285CV-8e RAID Battery
1 M3 screws (2) 2 RAID battery assembly
3 MegaRAID SAS 9285CV-8e card 4 RAID battery cable
1
2
3
4