Dell PowerEdge C8000 - Manual (Page 270)

270 Installing System Components
3 Disconnect the cables from the back GPGPU card riser.
See Figure 3-89.
4 Remove the two screws securing the back GPGPU card riser.
See Figure 3-89.
5 Pull the back GPGPU card riser away from the sled cover. See Figure 3-89.
Figure 3-89. Removing and Installing the Back GPGPU Card Riser
1 back GPGPU card riser with twin axial
cable
2 power cable
3 emergency throttling cable (for sled
with Xeon Phi 5110P/7120P cards only)
4 M3 screws (2)
2
1
4
3