Dell PowerEdge C8000 - Manual (Page 359)

Jumpers and Connectors 359
System Board V1.1 Jumper Settings
Figure 5-2. System Board V1.1 Jumper Settings
4 BIOS recovery (default) The BIOS recovery jumper is disabled.
The BIOS recovery jumper enables the
BIOS flash memory special recovery
mode.
5 Password
enable
(default) The password feature is enabled.
The password feature is disabled.
6 Power button
pass
(default) The BMC triggers a power button signal.
The power button passthrough signal is
triggered.
Table 5-1. System Board Jumper Settings
Item Jumper Setting Description
1 2 3
4 7 5 6