Dell PowerEdge C8000 - Manual (Page 220)

220 Installing System Components
c Remove the four screws securing the back GPGPU card assembly to
the sled cover. See Figure 3-54.
d Grasp the GPGPU card assembly by its edges, and carefully remove it
from the back GPGPU card riser. See Figure 3-54.
NOTE: An emergency throttling cable is connected underneath the GPGPU card.
Disconnect this cable before lifting the GPGPU card assembly from the sled cover.
See Figure 3-54.
Figure 3-54. Removing and Installing the Back GPGPU Card Assembly
1 M3 screws (4) 2 NVIDIA Tesla M2090 GPGPU card
3 emergency throttling cable 4 back GPGPU card riser
2
1
4
3