Dell PowerEdge C8000 - Manual (Page 110)

110 Using the System Setup Program
ACPI SPMI Table
(Enabled default)
When enabled, BIOS enables Advanced Configuration
and Power Interface (ACPI) Service Processor
Management Interface (SPMI) table for IPMI driver
installation.
When disabled, BIOS disables the ACPI SPMI table
for BMC ROM update.
Set BMC LAN
Configuration
Press <Enter> to set the BMC network.
Remote Access
Configuration
Press <Enter> to configure serial port settings related
to console redirection.
Restore on AC Power Loss
(Power On default)
Select the power state when the AC power is back.
• Power Off: System remains off until the power button
is pressed.
• Last State: System reverts to the last power state
before power loss.
• Power On: System switches back on after the AC
power loss.
Power Staggering AC
Recovery
(Immediate default)
Set the time period for the system to turn back on from
an AC power loss once power is resumed.
• Immediate: Power On (No Delay)
• Random: Auto
• User Defined: User defined delay time.
Power Button
(Enabled default)
When enabled, the power button can turn the system's
power off.
When disabled, the power button can only turn on
system power.
View System Event Log Press <Enter> to view the BMC system event log.
Event Logging
(Enabled default)
Enables or disables BIOS to log system events.
NMI on Error
(Enabled default)
Enables or disables BIOS to generate an Non-masked
Interrupt (NMI) when an uncorrectable PCI Express
error occurs.
Option Description